Back To School - Chip Bag Design

Prints on a 8.5"x11" sheet

To assemble you will need a printer, glossy paper, adhesive, scissors -- optional -- paper crimper, and pinking shears. (Links where to get them at the bottom)

1. Print design (see images for recommended printer settings) cut off any white edges.
2. Place printed image facing down and add adhesive to three sides of edges (do not add adhesive to side edge that will be touching the inside chip bag)
3. Place unopened chip bag on center of the printed design.
4. Fold side edge without adhesive first towards middle, then overlap the other side with adhesive over the bottom side and press so adhesive can stick.
5. Press top and bottom edges to make sure adhesive is firmly in place and closing both top and bottom openings.
6. Optional final steps: use PAPER CRIMPER for top and bottom edges, and then cut a bit from top and bottom USING PINKING SHEARS to give it a realistic chip bag look see links below for those products:   

PAPER CRIMPER

PINKING SHEARS

GLOSSY PAPER

PRINTER

You can use this file to create physical products to sell,  but you must cover the mock image with your watermark to make sure the image is not stolen. You cannot share or sell this image in any digital form

This is a digital file, no physical item will be shipped to you. 

No refunds, final sale.